All Products

DN25-DN300 Low temperature gate valve

The opening and closing component of a low-temperature gate valve is the gate, whose movement direction is perpendicular to the direction of the fluid. The gate valve can only be fully opened and fully closed, and cannot be adjusted or throttled....

DN100-DN600 Power station valve (electric gate valve)

The characteristics of power station valves compared to other valve products are high temperature and pressure, unique self sealing design, and the higher the pressure, the more reliable the sealing. Due to the unique performance technology...

DN25-DN300 Electric gate valve

Simply put, an electric valve uses an electric actuator to control the valve, thereby achieving the opening and closing of the valve. It can be divided into two parts: the upper part is an electric actuator, and the lower part is a valve. Product...

DN15-DN300 Rising stem cast steel gate valve

The gate has two sealing surfaces, and the most commonly used mode is that the two sealing surfaces of the gate valve form a wedge shape. The wedge angle varies depending on the valve parameters, usually 50, and is 2 ° 52 'when the medium...

DN15-DN300 Cast Steel Lift Check Valve

The function of check valves of this type is to only allow medium to flow in one direction and prevent flow in the opposite direction. Usually, this type of valve operates automatically, and under the pressure of fluid flowing in one direction, the...

DN65-DN300 aspirating check valve

This product is suitable for use as a one-way valve in oxygen pipeline networks and other systems, serving as a shut-off and check valve. For example, in oxygen rich systems, it prevents cold air backflow, and in slag splashing furnaces, it prevents...

DN25-DN300 Vertical check valve

The H42H/W vertical check valve is designed and manufactured strictly in accordance with the GB12235 standard. The valve disc is positioned along the center for lifting and lowering motion, and the liner is made of special materials with good wear...

DN15-DN250 Double plate to clamp check valve

The double disc check valve is used in pure pipelines, industrial, environmental protection, water treatment, and high-rise building water supply and drainage pipelines to prevent the reverse flow of media. The check valve adopts a wafer type, with...

DN25-DN300 Lift flange check valve

The flange lift check valve is suitable for pipelines with a nominal pressure of PN1.6~6.4MPa and a working temperature of -29~550 ℃ in various working conditions such as petroleum, chemical, and thermal power plants. Applicable media include water,...

DN65-DN300 300X slow-closing check valve

The slow closing check valve consists of a hydraulic control connecting system consisting of a main valve, a one-way valve, a needle valve, a ball valve, a micro filter, and a pressure gauge. By utilizing hydraulic automatic operation, the opening...

DN15-DN80 Pneumatic Sanitary Ball Valve

Hygienic grade ball valves are favored by most people in the current market, with many advantages such as small size, flexibility, simplicity, and ease of operation. Hygienic grade ball valves are widely used in various industries such as food,...

Pneumatic stainless steel wafer butterfly valve

Pneumatic butterfly valve is a type of pneumatic butterfly valve that uses a circular butterfly plate that rotates with the valve to achieve opening and closing action. The valve is mainly used as a block valve, and can also be designed to have the...

Stainless steel vertical check valve

Stainless steel check valve, also known as reverse flow valve, check valve, back pressure valve, and one-way valve, is an automatic valve because it automatically opens and closes by the force generated by the flow of the pipeline medium itself....

Turbine hard seal stainless steel butterfly valve

Stainless steel flange butterfly valves are also known as stainless steel flap valves. It mainly adopts a structural form of three eccentric multi-level metal hard sealing. It is widely used in metallurgy, petrochemical industry, power, drainage,...

DN50-DN600 Flange butterfly valve

The valve of the FLANGED BUTTERFLY VALVE flanged butterfly valve is equipped with flanges, and the flanges at both ends of the valve are connected to the pipeline during installation. The flange type butterfly valve has the characteristics of wear...

DN15-DN300 Rising stem soft seal gate valve

Rising stem gate valve: The valve stem nut is placed on the valve cover or bracket. When opening and closing the gate, the valve stem nut is rotated to achieve the lifting and lowering of the valve stem. This structure is beneficial for the...

High pressure forged steel globe valve

Forged steel globe valves are suitable for most applications, with low requirements for temperature media. However, there may be differences in the appropriate locations corresponding to many classifications, such as the ones mentioned below,...

DN50-DN300 Metal sealed worm gear butterfly valve

The worm wheel butterfly valve has a simple structure, small volume, and light weight, and is only composed of a few parts. Moreover, the valve can be quickly opened and closed by rotating it 90 °, with simple operation and excellent fluid control...

DN50-DN300 Manual pair butterfly valve

Manual wafer butterfly valve is a small and lightweight butterfly valve product with only a few components, and has been recognized in many fields due to its structural advantages Product Introduction of MANUAL WAFER BUTTERFLY VALVE A manual wafer...

Soft seal flange butterfly valve

The soft sealing seat is made of non-metallic materials with certain strength, hardness, and temperature resistance. It has good sealing performance and can achieve zero leakage, but its lifespan and adaptability to temperature are relatively poor....

DN50-100 Sandwich ball valve

The clamp supported ear type ball valve adopts an integral cast valve body, with a compact structure, small volume, and light weight, making it the shortest installation distance of a ball valve. (The ball valve itself has no flange) is connected...

DN15-DN50 1PC /2PC Ball valve(1000WOG)

1000WOG ball valve refers to 1000PSI (1000PSI is approximately 68.94 kilograms), and WOG is the English letters for water, oil, and gas. The pressure is 68.94 kilograms, suitable for valves in water, oil, and gas media. Product Introduction of 1PC...

Pneumatic insulated ball valve

Pneumatic V-shaped ball valve is a fluid control valve composed of valve body, ball, valve seat, actuator, position indicator, and other parts. Product Introduction of Pneumatic insulated ball valve The Pneumatic Insulated Ball Valve is a type of...

Pneumatic wafer ball valve

Pneumatic ball valves have evolved from plug valves. It has the same 90 degree rotation action, but the difference is that the plug body is a sphere with circular through-holes or channels passing through its axis. Product Introduction of Pneumatic...